Q. Where can I buy HardiePlank™ lap siding?
A: Alamo Exteriors uses James Hardie Siding exclusively for all of it's clients remodelling needs. Call our customer service at (210) 372-9495 to talk to a sales representative.
Q. How do your prices compare to the prices of brick and vinyl?
A: While prices vary from market to market, this is how HardiePlank™ siding compares in installed price with its competitors:
- More expensive than Vinyl
- Less expensive than Brick
- Equal or less than Hardboard Siding
- Less expensive than Synthetic Stucco
Q. Do I have to paint HardiePlank™ siding?
A: Yes, HardiePlank™ lap siding must be painted or you may order many James Hardie® products with ColorPlus® Technology. If painting, 100% acrylic topcoats are recommended. Do not paint when wet. For specific recommendations, please refer to JH Technical Bulletin No. S-100 or refer to paint manufacturers specifications. Back rolling is recommended if the siding is sprayed. Within 180 days for primed product and 90 days for unprimed.
Q. What types of trim can be used with HardiePlank™ siding?
A: The following are suitable trim products for use with HardiePlank™ siding:
- Fiber Cement
- Real Wood
- Engineered Wood
- Vinyl
- Coated or Corrosion-Resistant Aluminum
Q. How much does HardiePlank™ siding cost?
A: Call Alamo Exteriors at (210) 372-9495 to get a quote on your next project.
Q. Do you require a water-resistive barrier behind HardiePlank™ siding?
A: James Hardie as well as the Model Building Codes (IBC, IRC, and UBC) require the use of a water-resistive barrier. It is also a good building practice.
Q. How close to the ground can I install HardiePlank™ siding?
A: Model Building Codes (UBC, Standard, etc.) require that exterior sidings be installed with a minimum 6'' clearance of soil. This will allow for clearance when soil is back-filled against the foundation and footings.
Q. What type of weather-resistant barrier is required?
A: Any weather-resistant barrier complying with the Model Building Codes (UBC, Standard, etc.) is acceptable.
Q. Do I need to pre-drill?
A: No. HardiePanel™ siding is not required to be pre-drilled. It nails just as easily as traditional wood products.
Q. How much does it weigh?
A: 2.3 pounds per square foot.
|
